- 成片時長:
- 8s
- 成片尺寸:
- 960 × 720
Pixel 10爆裂重組
鏡頭模擬:65毫米IMAX膠片,支持微距的潘那維申變形鏡頭。全程呈現強烈膠片顆粒感。玻璃、拋光鋁材及內部元件表面反射引發水平變形鏡頭光暈。主光源為相機右上方暖中性光——乾淨親和,契
- 影片模型
- Seedance 2.0
- 成片時長
- 8s
- 畫面比例
- 4:3
- 生成模式
- 未指定
提示詞
Camera Simulation: 65mm IMAX film, macro-capable Panavision anamorphic lens. Strong film grain throughout. Horizontal anamorphic lens flares triggered by reflections on glass, polished aluminium, and internal component surfaces. Warm-neutral key light from above camera-right — clean, approachable, matching Pixel’s brand tone. Deep black void. Subtle warm rim light lifts dark components from background. Single continuous 7-second shot. No cuts. The camera faces the Pixel, flies through the exploding internals, rotates 180°, and watches them reassemble from the front. 00:00–00:01 — The Break A Google Pixel 10 floats in the void, rotating slowly. Every seam illuminates with a thin white light — a beat of silence — then the phone erupts apart. Every component separates outward along its assembly axis in a controlled explosion. Speed ramps to 180%. 00:01–00:03 — The Fly-Through The camera accelerates into the expanding cloud. It threads between the aluminium frame, camera modules, processor, memory stacks, ribbon cables, haptic motor, fingerprint sensor, and USB-C housing — each piece flashing bright as the camera passes. It flies directly between two camera bar lens elements, close enough to catch the anti-reflective coating shimmering purple and green. 00:03–00:04 — The Turn Speed drops to 40%. The camera executes a smooth 180° whip turn — component highlights streaking into horizontal motion blur. It settles facing the entire field of suspended components simultaneously. A wide anamorphic flare streaks across from the brightest internal reflection. 00:04–00:06 — The Rebuild Speed ramps to 200%. Every component reverses and accelerates inward. Motherboard arrives first, battery slides flat, camera bar lens stack and seat with mechanical precision, frame rails connect at their corners. Speed drops to 30% for final moments — the back glass descends and presses flush with a micro burst of dust. The display floats in, seats, and illuminates on contact. 00:06–00:06.5 — Product Hold Speed drops to 20%. Camera settles into a classic three-quarter angle. The camera bar catches a clean horizontal line. Screen glows. Void falls to pure black. Hold. 00:06.5–00:07 — End Card Smash cut to black. Google “G” logo fades in centred, full colour. Below it: “Pixel 10 — built for every moment”. Film grain. Hold.
準備素材與修改建議
- 先檢查產品輪廓與文字,再修改燈光。
- 一次只修改一個動作或鏡頭方向,其他條件保留。
- 這些是修改與檢查建議;來源影片不能證明 Studio 按這些修改生成了相同結果。