Press one dispenser pump and follow the single dose

Original, untested video brief. No input image or generated result is supplied.

1. Task and boundary

Press the head of one filled soap dispenser once and show a small dose leaving its existing spout into a shallow dish. Keep the bottle planted and the receiving dish still. Release the head after the downward stroke, then show the flow ending without a second pump.

This original shot brief is untested. Use an already prepared dispenser with readable head travel. Exclude priming instructions, dose accuracy, hidden valve diagrams and promises about any particular pump product.

2. Authorized first frame

Prepare a photograph or accurate drawing you own or have permission to use. Show a plain filled dispenser with its pump head raised, the original fingertip resting on top and a shallow dish beneath the spout. Keep the outlet clearly visible.

Use a side view showing the pump stem, spout and receiving dish in one frame. Leave a small open gap between outlet and dish. Avoid labels, a cropped nozzle or a hand covering both the head travel and the liquid exit.

3. Use the generator

Open the current image-to-video generator in a mode accepting your authorized first frame. Paste the prompt; check settings and cost before submission. Nothing runs automatically.

4. Prompt and timing

Start from my authorized image of one filled dispenser with its pump head raised, the original fingertip on top and a fixed shallow dish under the visible spout. Lock the camera, bottle and dish. Press the same pump head straight downward once along its existing stem. During the downstroke, let a small connected dose of liquid emerge from the original outlet and fall into the dish. Keep the outlet attached to the head and preserve the bottle shape. At the bottom of the stroke, lift the fingertip so the head can rise again, then let the liquid flow finish. Hold the deposited liquid in the dish. No second press, liquid emerging through the bottle wall, changing nozzle, disappearing dose, bottle tilt, camera move, cut or exact-volume label.

1. Establish, first fifth: locate the raised head, stem, outlet and empty receiving area.
2. Press, middle three fifths: follow the head down and the dose across the outlet-to-dish gap.
3. Release, final fifth: inspect head return, flow ending and the liquid remaining in the dish.

5. Inspect the output

For each check, record a frame or time, observation and pass, fail or inconclusive judgment.

• The head moves along the original stem while the bottle stays planted.
• Liquid begins at the visible spout during the downward action.
• The dose follows a continuous path into the same dish.
• The head returns after finger release without the whole bottle rising.
• The final liquid remains in the dish after the flow ends.
• If the outlet is hidden, mark liquid-source continuity inconclusive.

6. Fix one failure

• Liquid appears in the dish instantly: expose the entire gap and start flow at the outlet.
• The bottle squashes: constrain motion to the pump head and stem.
• The head never returns: include finger clearance before the final hold.
• The dose grows indefinitely: use one short downstroke and a clear flow-ending beat.
• The nozzle detaches: preserve its connection and orientation on the moving head.

7. Ending and limits

End with the head raised again, the flow stopped and one small deposited dose in the original dish.

Save your result, authorized input, exact prompt, settings and inspection notes.

No H3 result, dosing test, valve verification or product recommendation is supplied. The visible head-to-flow relationship does not establish the dispenser’s internal mechanism or measured output.

A dropper uptake scene uses release to draw liquid inward. This task uses a visible downward pump stroke and a separate outlet to deliver liquid outward; the bottle never tips as in the pouring task.