Lower a press filter while the grounds stay beneath it

Original, untested video brief. No input image or generated result is supplied.

1. Task and boundary

Press the filter disc of a clear French press downward through the liquid. Follow the disc rim, rod and visible grounds beneath it. End with the filter near the lower portion of the vessel and a clearer region above, without pouring or removing the lid.

This original plan is untested. Use a familiar press with its filter visible through the vessel. Exclude brewing recipes, flavor claims, perfectly clear liquid and certification of hidden mesh performance.

2. Authorized first frame

Prepare a photograph or accurate drawing you own or have permission to use. The filter starts just below the liquid surface, its central rod upright and one original hand resting on the knob. Visible grounds occupy the liquid below it.

Use a side view showing the whole disc rim, vessel base and liquid level. Keep the lid seated and the vessel on a plain surface. Choose readable particles rather than dense opaque liquid that conceals the disc.

3. Use the generator

Open the current image-to-video generator in a mode accepting your authorized first frame. Paste the prompt; check settings and cost before submission. Nothing runs automatically.

4. Prompt and timing

Start from my authorized image of a clear French press with its filter just below the liquid surface, visible grounds underneath and the original hand on the upright plunger knob. Lock the camera, lighting, vessel and seated lid. Push the same rod slowly downward once so the filter disc descends level inside the vessel. Keep its rim close to the original vessel wall without crossing through it. The visible grounds remain mainly below the moving disc and gather in the lower region as it descends. Preserve a clearer liquid region above the filter without demanding perfectly particle-free liquid. Keep the rod connected to the same disc and maintain the original liquid inside the vessel. Stop before the disc meets the base and hold. No pouring, rising vessel, disappearing grounds, new filter, camera movement, cut or numerical readout.

Establish, first fifth: locate the disc, rod, liquid surface and grounds below.
Press, middle three fifths: compare early, middle and late disc heights with the particle region.
Hold, final fifth: inspect the lower filter position and the retained grounds without changing vessels.

5. Inspect the output

For each check, record a frame or time, observation and pass, fail or inconclusive judgment.

The rod and disc descend together while the vessel and lid remain fixed.
The disc stays broadly level and inside the original walls.
Visible grounds collect beneath the disc instead of vanishing during the stroke.
The above-filter region becomes comparatively clearer without an instant whole-vessel swap.
The final disc remains above the base with its rod attached.
If opacity hides the disc-ground relationship, mark retention inconclusive.

6. Fix one failure

Grounds disappear: keep a visible lower particle region after the filter passes.
The disc tilts through the wall: use a clearer rim and constrain level axial descent.
The liquid drains away: preserve the original enclosed vessel and remove pouring language.
The rod separates: retain its central connection throughout the stroke.
The scene becomes opaque: revise the authorized input so the disc and particles are distinguishable.

7. Ending and limits

Finish with the original filter low inside the vessel, visible grounds beneath it and liquid remaining above.

Save your result, authorized input, exact prompt, settings and inspection notes.

No H3 generation, filtration-efficiency test, mesh-size verification or brewing recommendation is supplied. Only the visible moving boundary and retained particle region are reviewed.

The sieve task sorts dry pieces through fixed openings. Here the filter itself moves through one liquid vessel, progressively separating a lower particle region. A different beverage color does not change the task.