The chain detaches at the bail
Change only the excursion to a smaller sway and recheck the same bail region at the turning point.
Task template
Pendant sway: keep the chain connected through one small motion
Ask for one small side sway and a settled pendant. The supplied jewelry illustration is an original exercise source; no H3 generation or physically calibrated pendulum behavior is claimed.
Includes original practice inputs and a review checklist. This prompt has not been independently tested with the generation model.
Download the input image below and upload it manually in the generator; the button carries the prompt.
01Prepare the inputs
- Choose a pendant source where the bail and both sides of the chain are visible. The illustration keeps the chain on a plain backdrop so connection failures are easier to see.
- Include the upper suspension points in the crop. A chain disappearing through the frame edge cannot prove whether its anchors stayed fixed.
- Use a simple pendant shape with a visible top attachment. Do not combine the sway with gemstone sparkle, chain twisting and camera orbit in the first attempt.
- Define one side excursion and return toward the center as the motion target. This is a visual brief rather than a prescribed period, tension or damping calculation.
02Prompt and procedure
Copyable prompt
Start from the uploaded suspended pendant. The two upper chain suspension points stay fixed, and the camera remains still. The pendant and its connected lower chain make one small gentle sway to the right, reach a visible turning point, then return toward the center and settle. The chain stays continuous through the pendant bail throughout the motion. The bail remains attached to the same top edge of the pendant; no part separates or passes through another. Preserve the pendant outline and chain thickness. Keep the background and light fixed. One restrained motion, no repeated swinging, no spin, no extra jewelry.
Locate the connection path
Trace from one upper chain point through the bail to the other side. Check that the starting image has an uninterrupted path; a decorative line crossing the pendant is not enough to define an attachment.
Choose the small excursion
Specify a single rightward sway with one turning point and a return toward center. Leave the camera still so the chain relationship can be judged without perspective changes.
Inspect the reversal
Pause when the pendant is furthest right. The bail should still sit on the same pendant edge, and both chain sides should connect smoothly rather than swapping or stretching into a rigid bar.
Finish on a settled relation
Compare the end with the start for pendant outline and chain thickness. If the sway repeats or the attachment fails, change the excursion request before adding richer materials or shine.
03Check the result
- Both upper chain suspension points remain fixed in the frame.
- The chain forms a continuous visible path through the bail.
- The bail remains attached to the pendant at the same top edge.
- There is one clear rightward turning point rather than multiple oscillations.
- The pendant does not spin to reveal an invented back.
- The chain does not clip through the pendant or stretch into a thick rod.
- The ending settles near the center with the original pendant outline intact.
04Troubleshoot and finish
The upper anchors drift with the pendant
Name both upper suspension points as the fixed role; keep the camera and lighting instructions unchanged.
The pendant spins
Remove only rotational language and request a small side sway in the visible plane; compare front-face visibility.
The sway repeats forever
Change only the ending to return toward center and settle after the first turning point; remove loop wording.
End after the single sway has settled and retain a close crop of the bail at start, turning point and end. Keep the result labeled as a visual jewelry motion study.
