Installatiegids voor een capsulekoffiemachine

A 30-second tutorial video on installing and using a capsule coffee machine. 0-2s: the opening title card reads "seedance capsule coffee machine setup tutorial". 2-5s, Step 1: install the water tank, reference @image1, medium shot from a slightly high angle, rear of the machine body, align the water tank with the slot on the back of the body and push it straight down until it clicks firmly into place, clearly showing how the tank's bottom clips align with the body's slot, the water level line visible through the tank's transparent section, voiceover "First, install the water tank. Align the tank with the slot on the back of the machine; a click means it is locked in place.". 5-9s, Step 2: install the drip tray, reference @image2, close-up front view, front bottom of the body, slide the drip tray horizontally into the guide rails at the bottom until fully seated, voiceover "Next, install the drip tray. Align the tray with the bottom rails.". 9-13s, Step 3: install the used-capsule collection box, reference @image3, close-up from a slightly low angle, the cavity beneath the drip tray, align the collection box with the recess and push it in flush with the drip tray, voiceover "Then insert the capsule collection box. Used capsules will drop down here automatically.". 13-18s, Step 4: first fill with water, reference @image4, close-up side view, the water tank at the top/back of the body, open the tank lid and pour in clean water up to the MAX water level line, then close it, emphasizing the water level line, voiceover "Open the tank lid, pour in clean water, being careful not to exceed the maximum water level line, then close the tank lid.". 18-25s, Step 5: power on, reference @image5, medium shot front view, front of the body, plug in the power cord and press the power button; the indicator light goes from blinking to steady (preheating complete), voiceover "Connect the power and press the power button. The indicator light starts blinking, which means it is preheating. When the light turns steady, the machine is ready.". 25-30s, Step 6: first rinse (without a capsule), reference @image6, medium shot moving to a close-up front-side view, without inserting a capsule press the brew button directly so hot water flows out and rinses the lines, emphasizing the "no capsule needed" note, voiceover "The last step, the first rinse. Note that this step does not require a capsule; just press the brew button. Once the rinse is done, your coffee machine is ready to use."